LOCTITE HY 4090, 50 g Dual cartridge, no mixers
ID: 2113520
A high-viscosity, 2-part hybrid universal structural bonder with excellent humidity and vibration resistance.
- Vibration, shock and impact resistant
- High temperature- and moisture-resistance
- UV-resistant for outdoor applications
- Fixture time: 90-180 secs
- High shear strength
€36.56
In stock
Technical and safety documents
Technical
Technical document
Safety
Safety document EN 1
Safety document EN 2
Safety document EN 3
Safety document EN 4
Safety document LT 1
Safety document LT 2
Safety document LT 3
Safety document LT 4
Safety document LV 1
Safety document LV 2
Safety document LV 3
Safety document LV 4
Safety document EE 1
Safety document EE 2
Safety document EE 3
Safety document EE 4
LOCTITE® HY 4090 is a fast and powerful, high-viscosity, off-white-to-light-yellow universal bonder. In the world of structural bonding, it is unique, combining strength and speed to provide powerful, long-lasting bonds. It has a fixture time of 90-180 seconds and is suitable for gaps up to 5 mm (0.2"). Resistant to vibration, shock and impact, it works with a wide range of substrates. For best results, use with LOCTITE® 50 ml Adhesive Mixing Nozzle, LOCTITE® 400 ml Adhesive Mixing Nozzle, LOCTITE® 96001, or LOCTITE® 983439.
| Recommended for use with | Metal, Plastic, Rubber, Composite: advanced composites, Composite, Dry surface, Elastomer: highly filled elastomer, Epoxy, Fiberboard, Gel coat, Laminate, Non-gel coat, Painted surface, Phenolic, Thermoplastic, Thermoset, Urethane: cast urethane, Vinyl, Wood |
|---|---|
| Fixture time | < 180.0 sec. |
| Key characteristics | Gap filling, Impact resistant, Viscosity: high viscosity, Cure speed: fast cure, Moisture resistant, Humidity resistant, UV resistant, Vibration resistant |
| Colour | Off white |
| Applications | Bonding plastic, Bonding rubber, Structural bonding, Bonding dissimilar materials, Construction, Direct bonding, Edge bonding, Interior repairs, Exterior repairs |
| Physical form | Liquid |
| Application method | Dispense gun |
| Cure type | Room temperature (ambient) cure, Two component mix |
| Number of components | 2 part |
| Gap fill | 2.0 mm |
| Operating temperature | -40.0 °C - 300.0 °C ( -40.0 °F - 284.0 °F ) |
| FEA (finite element analysis) | Finite strain, Viscoelastic |
| Mix ratio, by weight | 1 : 1 |
| Shear strength, Steel (grit blasted) | 17.0 N/mm² ( 2420.0 psi ) |
| Status | In Stock |