LOCTITE FREKOTE 700-NC, 5 l Can
ID: 380963
A 1-part, clear, solvent-based, multi-purpose mould-release agent for epoxy and polyester gel coat applications.
- Contains no chlorinated solvents
- Leaves a high-gloss finish
- Provides high slip
- Suitable for advanced composites
€368.13
In stock
Technical and safety documents
LOCTITE® FREKOTE® 700NC is a clear, solvent-based, moisture-curing release agent for epoxy and polyester gel coat advanced composites. It's typically used for releasing epoxies, polyester resins, thermoplastics, and most other moulded polymers. It’s a versatile agent with high thermal stability, offering high slip where mould geometry problems are encountered. It is applied to mould surfaces from room temperature up to 135°C (275°F) by spraying, brushing or wiping, cures rapidly at room temperature and leaves a high-gloss finish.
| Recommended for use with | Composite: advanced composites |
|---|---|
| Key characteristics | Solvent based |
| Finish reflection | Gloss |
| Full cure time, @ 20.0 °C | 20.0 min. |
| Drying time between coats, @ 20.0 °C | 5.0 min. |
Write Your Own Review
