LOCTITE 660, 50 ml Accordion
ID: 267328
A 1-part, very high-viscosity, high-strength retaining compound ideal for use on badly worn seats, keys, splines, bearings or tapers, avoiding the need for re-machining. Also suitable for retaining shims.
- High viscosity
- Ideal for rehabilitating worn parts without re-machining
- Registered to NSF Category SS
- Suitable for retaining shims
- Gap fill of 0.25 mm - 0.5 mm (0.01" - 0.02")
€51.08
In stock
Technical and safety documents
If you want a product that enables the re-use of worn bearing seats, keys, splines or tapers, try LOCTITE® 660. This high-strength retaining compound is designed for the bonding of cylindrical fitting parts, particularly where bond gaps occur – and without the need for re-machining. It’s also suitable for retaining shims. Expect excellent gap-cure characteristics.
| Recommended for use with | Metal: steel |
|---|---|
| Fixture time | 15.0 min. |
| Key characteristics | Thixotropic, Gap filling, Strength: high strength |
| Colour | Silver |
| Agency approvals / certificates / specifications | NSF P1 |
| Applications | Repairing, Retaining, Press fitting |
| Technology | Acrylic |
| Physical form | Paste |
| Application method | Manual |
| Cure type | Anaerobic cure |
| Gap fill | 0.25 mm - 0.5 mm |
| Operating temperature | -65.0 °F - 300.0 °F ( -55.0 °C - 150.0 °C ) |
| Viscosity | 250000.0 mPa·s (cP) |
| Shear strength, Steel | 23.0 N/mm² ( 3335.0 psi ) |
Write Your Own Review
